Minwax®.Pre-Stain Wood Conditioner prepares bare wood for staining. It penetrates the grain of the wood to promote uniform acceptance of oil-based stains.
- Treating the surface with Pre-Stain Wood Conditioner helps prevent streaks and blotches by evening out the absorption of oil-based stains.
- It can be applied over any wood but is especially necessary when working with soft or porous woods like pine, alder, birch, and maple.
|应用工具：||cloth or brush|
|Recoat:||after 15 minutes, but no more than 2 hours|
|清理：||mineral spirits or paint thinner, following manufacturer’s safety instructions|
|Recommended Uses:||on soft or hard woods before using oil- based wood stains|
方向Instrucciones en Español
警告！Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at1-800-424-LEAD(in US) or contact your local health authority.
- Before staining, apply Minwax® Pre-Stain Wood Conditioner on clean, raw wood, using a brush or cloth.
- Allow to penetrate for 5 to 15 minutes, then remove any excess with clean, dry cloth.
- Apply stain within two hours of application of Pre-Stain Wood Conditioner. For best results, stain withMinwax®木材完成™那Minwax®.Gel Stain， 要么Minwax®.PolyShades®。
COVERAGE:125 square feet per quart.
注意：Minwax®.Pre-Stain Wood Conditioner is not recommended for use with water-based stains. For water-based stains, pretreat wood withMinwax®.Water Based Pre-Stain Wood Conditioner。
危险：Rags, steel wool, other waste soaked with this product, and sanding residue may spontaneously catch fire if improperly discarded. Immediately place rags, steel wool, other waste soaked with this product, and sanding residue in a sealed, water-filled, metal container. Dispose of in accordance with local fire regulations.
CAUTIONS: CONTAINS ALIPHATIC HYDROCARBONS.
Contents are COMBUSTIBLE。远离热火和开放的火焰。
蒸汽有害。在通风处使用。为了避免那xposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage.
FIRST AID:In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE.含有溶剂，可导致永久性脑和神经系统损坏。故意集中和吸入内容可能是有害的或致命的故意滥用。
CONFORMS TO ASTM D-4236. Contact a physician for more health information.
Much of the wood used for projects is "soft" wood, such as pine or spruce. But even some hardwoods, like alder or aspen, are porous and tend to absorb stain unevenly. That’s why it’s essential to pre-treat soft or porous woods with Minwax® Pre-Stain Wood Conditioner to help ensure even stain color penetration and beautiful results.
Yes, but more dramatic results will be seen on softwoods. Hardwoods tend to have a more uniform pore structure than softwoods, resulting in more uniform staining. Exceptions include maple, alder and aspen, which have uneven pore structures. Pre-Stain Wood Conditioner should be used on these woods.
Minwax®预染色木质调理剂中的树脂将开始干燥，可能抑制污渍吸收。要再次打开毛孔，用媒体砂砾轻轻砂木头（＃120 - ＃180）砂纸。
Does Minwax® Pre-Stain Wood Conditioner need to be sanded before stain is applied?
Is it possible to apply too much Minwax® Pre-Stain Wood Conditioner?
不,不是,如果标签说明are followed and any excess Minwax® Pre-Stain Wood Conditioner is wiped off after 5 to 15 minutes.
Can Minwax® Pre-Stain Wood Conditioner be used prior to applying a water-based stain?
No. Since Minwax® Pre-Stain Wood Conditioner is an oil-based product, it should only be used as a pre-stain treatment with oil-based stains such as Minwax® Wood Finish™ stains. For water-based stains, useMinwax®.Water Based Pre-Stain Wood Conditioner。