Overview
Overview
Minwax Color-Changing Wood Filler is an easy to use solution for small defects in unfinished wood.
- Dries natural when it's ready to sand.
- Specialy formulated to accept wood stains.
- Made with real wood fibers.
Product Details
Product Details
| Application Tool: | putty knife |
| Location: | Interior and Exterior use |
| Cleanup: | soap and water |
| Recommended Uses: | for filling cracks, small gouges, nail holes, knot holes and other defects in unfinished indoor and outdoor wood surfaces |
| Available Sizes: | 5.5 oz, 8 oz, 16 oz |
Directions
Directions
PREPARATION:
Surface must be clean, dry, and free of dirt, grease, oil and loose particles. This product should not be used on holes larger than 3/4". For larger holes, use Minwax High Performance Wood Filler.
APPLICATION:
- Using a putty knife, spread a liberal amount of Wood Filler into the area to be filled.
- Press the filler firmly in place.
- Fill slightly above surface while minimizing overspreading on surrounding areas.
- The filler will apply purple and dries natural. Dry time will vary depending on depth of area to be filled. Most common shallow repairs will dry within 15 minutes.
- Deeper repairs may need more than one filling and may require 2-6 hours to dry. Let dry between fillings.
- Sand filler smooth and flush to the wood.
- Remove all sanding residue before staining, topcoating or painting.
CLEAN UP:
Clean application tools and hands with soap and water before wood filler hardens.
STAINING & FINISHING:
- Touch up with Minwax Markers or choose a Minwax penetrating stain, such as Minwax Wood Finish, Minwax Water-Based Stain or Minwax Gel Stain.
- 使用雅高集团ding to label directions.
- After staining, apply a protective clear finish for long lasting beauty and protection.
- For exterior use apply Minwax Helmsman Spar Urethane. Accepts paint as well.
Note:
Not recommended for use with Minwax Polyshades. Do not apply when temperature is less than 40 F. Keep from freezing.