|
United States

Minwax®
Complete 1-Step Floor Finish

Where to Buy
Minwax®Complete 1-Step Floor Finish
Overview

Overview

Minwax®Complete 1-Step Floor Finish is a two-in-one stain and protective finish that provides superior durability for hardwood floors.

  • Saves time compared to staining with one product and protecting with another.
  • Can be used over bare wood or over an existing polyurethane finish; over a properly prepared floor, this product allows you to change the color of your floor without sanding down to bare wood.
  • 涂层之间没有打磨
  • Cleans up easily with soap and water

Product Details

Product Details

Sheens: gloss, satin
Application Tool: 合成的垫施加器
Location: interior wood floors
重涂: after 2 hours
Dry Time: 24 hours for light foot traffic; 72 hours to install rugs and replace furniture
Cleanup: 肥皂和温水
Coverage: 500平方英尺每加仑
Coats: 2-3
VOC含量: Maximum VOC of 275 g/L
推荐用途: 所有的硬木地板,可以在已预先完成的地面使用
Directions

Directions

Instrucciones西班牙文

For a beautiful hardwood floor

Interior Use Only.

WARNING!Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.

STEP 1: SAND THE FLOOR

Whether you have a bare wood floor, or a wood floor that already has a finish on it, you will need to sand the floor to prepare it for finishing. Rent or purchase a floor sander. Follow the sander manufacturer’s directions to prepare your floor. If you have factory finished floors, please consult a flooring professional before using this product.

您需要将您的沙子倒楼光秃的木材,如果:

  • Your floor’s finish is cracking, peeling, or completely worn away in areas, or
  • Shellac, lacquer, wax, or products containing wax or stearates have been applied to the floor, or
  • 如果你想使你的现有地面较浅的颜色。

You can do a “screen and recoat” if:

  • Your existing finish is in good condition, with no chipping, peeling, or worn through areas, and
  • Shellac, lacquer, wax, or products containing wax or stearates have not been applied to the floor.

对于“屏幕和重涂”there is no need to remove your existing floor finish. Instead, you can simply “screen” the existing finish using a 150-180 grit screen to prepare it for the addition of a new finish.

For “Bare Wood,”If you have sanded the floor down to bare wood, or you have a new, unfinished wood floor, sand and prepare the floor following the sander manufacturer’s directions, ending with 100 grit sandpaper or equivalent. Then dampen the bare floor with water, allow to dry and then screen with a 320 grit maroon pad. Remove all sanding dust.

那么对于所有楼层,after sanding remove all sanding dust. Thoroughly vacuum and wipe the wood with a clean, damp cloth to remove any remaining dust. Allow the wood to dry completely.

STEP 2: APPLY MINWAX® COMPLETE 1-STEP FLOOR FINISH

  • 充分搅拌Minwax®Complete 1-Step Floor Finishusing a stir stick for at least one minute before application . DO NOT SHAKE. Product should be at room temperature for best results.
  • 在地板上的不显眼的地方总是测试产品,以验证所需的颜色。您的地板的现有颜色将决定最终的面漆的颜色。
  • Use a new synthetic painter’s pad. Wet the pad evenly withComplete 1-Step Floor Finish.
  • 地板块在木纹的方向上的长度以下施加均匀的涂层。不要停在板之间。为了达到最佳效果,适用于从房间到另一个的一端。
  • Maintain a wet edge and avoid leaving dry spots while applying the finish.
  • 允许精干燥至少两小时,但不超过24小时。如果这个时间之后,需要涂层之间没有打磨。
  • Note: If the finish dries for more than 24 hours, sand the finish lightly with a 320 grit maroon pad. Excessive sanding will remove color from the floor.
  • Surface must be free of dust before applying second coat. Apply a second coat following the steps above.
  • For bare wood, a third coat is recommended. Additional coats will produce a deeper color.

Note:Floor will bear light foot traffic in 24 hours. Avoid heavy traffic, and do not install rugs or clean floors for seven days. When replacing furniture, do not slide.

Clean Up:Clean application tools with soap and warm water immediately after use.

Note:Above dry times and coverage rates are based on good ventilation, temperature of 77ºF and 50% relative humidity. Lack of ventilation or application of thick coats may extend dry time. Do not use steel wool with this product.

Coverage:Approximately 500 square feet per gallon.

Storage:在室温下储存。防止冻结。

Colors

Colors

示出的颜色是仅供参考。他们一直在使用数字生产技术再现。对木材进行验证所需颜色的隐藏区域总是测试污点。

autumn-wheat
秋季小麦
橡子棕色
ACORN BROWN
aged-leather
AGED LEATHER
autumn-wheat
秋季小麦- SATIN
橡子棕色
ACORN BROWN - SATIN
aged-leather
老年皮革 - SATIN
布兰迪
BRANDYWINE
布兰迪
BRANDYWINE - SATIN
gunstock
GUNSTOCK
gunstock
GUNSTOCK - SATIN
常见问题

常见问题

What is Minwax® Complete 1-Step Floor Finish?

Minwax®Complete is a two-in-one stain and protective finish that provides superior durability for hardwood floors. It can be used over bare floors or previously finished floors.

什么是使用Minwax®完成1步楼完成的优势是什么?

Minwax®完成相较于一个产品染色和另一个保护节省时间。Minwax®完全可以在裸露的木材使用。它也可以在现有的聚氨酯面漆使用;在适当的准备地板,该产品可以让你改变你的地板的颜色没有打磨下光秃的木材。它可以让你完成你的地板在一天内,不需要涂层之间的打磨,并用肥皂和水容易清理。

What will Minwax® Complete 1-Step Floor Finish look like on my floor?

All wood reacts to stains differently due to its natural color and pore size, and these characteristics will affect the final look of your floor. Be sure to test the color on a hidden spot, such as in a closet, to see how the new finish will look on the floor. If you are applying it over an existing finish, the result will be a combination of the old and new colors.

Should Minwax® Complete 1-Step Floor Finish be sanded in between coats?

没有被打磨涂层之间需要只要不超过24小时已经过去了施加先前的涂层。如果Minwax®完成已被允许干燥24小时或更长时间,需要涂层之间的光打磨。不要过分沙子,否则你可能会移除了一层颜色,这与保护面漆混合,从地板。

Can Minwax® Complete 1-Step Floor Finish be applied over an existing finish?

是的,只要含虫胶,漆,蜡制品或硬脂酸盐还没有被应用到地板上和现有的完成情况良好,没有碎片,剥离或通过区域磨损。如果这些条件都满足,那么你就可以轻轻沙子使用150-180砂砾屏幕现有的完成,为增加Minwax®完全的准备。不过,如果你想减轻现有地板的颜色,则需要申请Minwax®完成之前删除现有的光洁度。

What is the best way to apply Minwax® Complete 1-Step Floor Finish?

使用合成画家的垫。确保用Minwax®完全均匀地湿润了。地板块在木纹的方向上的整个长度以下施加均匀的涂层。不要板之间停止,总是从房间到另一个的一端适用。为了防止圈痕,请务必保持湿边。不要让你的光洁度一举干施加下之前。

灿Minwax®完整的地板面漆可以在工厂加工过的地板使用?

If you have factory finished flooring, it’s best to consult a flooring professional before undertaking any floor finishing project.

安全表
Reviews

Reviews

Overview

Minwax®Complete 1-Step Floor Finish is a two-in-one stain and protective finish that provides superior durability for hardwood floors.

  • Saves time compared to staining with one product and protecting with another.
  • Can be used over bare wood or over an existing polyurethane finish; over a properly prepared floor, this product allows you to change the color of your floor without sanding down to bare wood.
  • 涂层之间没有打磨
  • Cleans up easily with soap and water

Product Details

Sheens: gloss, satin
Application Tool: 合成的垫施加器
Location: interior wood floors
重涂: after 2 hours
Dry Time: 24 hours for light foot traffic; 72 hours to install rugs and replace furniture
Cleanup: 肥皂和温水
Coverage: 500平方英尺每加仑
Coats: 2-3
VOC含量: Maximum VOC of 275 g/L
推荐用途: 所有的硬木地板,可以在已预先完成的地面使用

DirectionsInstrucciones西班牙文

For a beautiful hardwood floor

Interior Use Only.

WARNING!Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.

STEP 1: SAND THE FLOOR

Whether you have a bare wood floor, or a wood floor that already has a finish on it, you will need to sand the floor to prepare it for finishing. Rent or purchase a floor sander. Follow the sander manufacturer’s directions to prepare your floor. If you have factory finished floors, please consult a flooring professional before using this product.

您需要将您的沙子倒楼光秃的木材,如果:

  • Your floor’s finish is cracking, peeling, or completely worn away in areas, or
  • Shellac, lacquer, wax, or products containing wax or stearates have been applied to the floor, or
  • 如果你想使你的现有地面较浅的颜色。

You can do a “screen and recoat” if:

  • Your existing finish is in good condition, with no chipping, peeling, or worn through areas, and
  • Shellac, lacquer, wax, or products containing wax or stearates have not been applied to the floor.

对于“屏幕和重涂”there is no need to remove your existing floor finish. Instead, you can simply “screen” the existing finish using a 150-180 grit screen to prepare it for the addition of a new finish.

For “Bare Wood,”If you have sanded the floor down to bare wood, or you have a new, unfinished wood floor, sand and prepare the floor following the sander manufacturer’s directions, ending with 100 grit sandpaper or equivalent. Then dampen the bare floor with water, allow to dry and then screen with a 320 grit maroon pad. Remove all sanding dust.

那么对于所有楼层,after sanding remove all sanding dust. Thoroughly vacuum and wipe the wood with a clean, damp cloth to remove any remaining dust. Allow the wood to dry completely.

STEP 2: APPLY MINWAX® COMPLETE 1-STEP FLOOR FINISH

  • 充分搅拌Minwax®Complete 1-Step Floor Finishusing a stir stick for at least one minute before application . DO NOT SHAKE. Product should be at room temperature for best results.
  • 在地板上的不显眼的地方总是测试产品,以验证所需的颜色。您的地板的现有颜色将决定最终的面漆的颜色。
  • Use a new synthetic painter’s pad. Wet the pad evenly withComplete 1-Step Floor Finish.
  • 地板块在木纹的方向上的长度以下施加均匀的涂层。不要停在板之间。为了达到最佳效果,适用于从房间到另一个的一端。
  • Maintain a wet edge and avoid leaving dry spots while applying the finish.
  • 允许精干燥至少两小时,但不超过24小时。如果这个时间之后,需要涂层之间没有打磨。
  • Note: If the finish dries for more than 24 hours, sand the finish lightly with a 320 grit maroon pad. Excessive sanding will remove color from the floor.
  • Surface must be free of dust before applying second coat. Apply a second coat following the steps above.
  • For bare wood, a third coat is recommended. Additional coats will produce a deeper color.

Note:Floor will bear light foot traffic in 24 hours. Avoid heavy traffic, and do not install rugs or clean floors for seven days. When replacing furniture, do not slide.

Clean Up:Clean application tools with soap and warm water immediately after use.

Note:Above dry times and coverage rates are based on good ventilation, temperature of 77ºF and 50% relative humidity. Lack of ventilation or application of thick coats may extend dry time. Do not use steel wool with this product.

Coverage:Approximately 500 square feet per gallon.

Storage:在室温下储存。防止冻结。

Colors

示出的颜色是仅供参考。他们一直在使用数字生产技术再现。对木材进行验证所需颜色的隐藏区域总是测试污点。

autumn-wheat
秋季小麦
橡子棕色
ACORN BROWN
aged-leather
AGED LEATHER
autumn-wheat
秋季小麦- SATIN
橡子棕色
ACORN BROWN - SATIN
aged-leather
老年皮革 - SATIN
布兰迪
BRANDYWINE
布兰迪
BRANDYWINE - SATIN
gunstock
GUNSTOCK
gunstock
GUNSTOCK - SATIN

常见问题

What is Minwax® Complete 1-Step Floor Finish?

Minwax®Complete is a two-in-one stain and protective finish that provides superior durability for hardwood floors. It can be used over bare floors or previously finished floors.

什么是使用Minwax®完成1步楼完成的优势是什么?

Minwax®完成相较于一个产品染色和另一个保护节省时间。Minwax®完全可以在裸露的木材使用。它也可以在现有的聚氨酯面漆使用;在适当的准备地板,该产品可以让你改变你的地板的颜色没有打磨下光秃的木材。它可以让你完成你的地板在一天内,不需要涂层之间的打磨,并用肥皂和水容易清理。

What will Minwax® Complete 1-Step Floor Finish look like on my floor?

All wood reacts to stains differently due to its natural color and pore size, and these characteristics will affect the final look of your floor. Be sure to test the color on a hidden spot, such as in a closet, to see how the new finish will look on the floor. If you are applying it over an existing finish, the result will be a combination of the old and new colors.

Should Minwax® Complete 1-Step Floor Finish be sanded in between coats?

没有被打磨涂层之间需要只要不超过24小时已经过去了施加先前的涂层。如果Minwax®完成已被允许干燥24小时或更长时间,需要涂层之间的光打磨。不要过分沙子,否则你可能会移除了一层颜色,这与保护面漆混合,从地板。

Can Minwax® Complete 1-Step Floor Finish be applied over an existing finish?

是的,只要含虫胶,漆,蜡制品或硬脂酸盐还没有被应用到地板上和现有的完成情况良好,没有碎片,剥离或通过区域磨损。如果这些条件都满足,那么你就可以轻轻沙子使用150-180砂砾屏幕现有的完成,为增加Minwax®完全的准备。不过,如果你想减轻现有地板的颜色,则需要申请Minwax®完成之前删除现有的光洁度。

What is the best way to apply Minwax® Complete 1-Step Floor Finish?

使用合成画家的垫。确保用Minwax®完全均匀地湿润了。地板块在木纹的方向上的整个长度以下施加均匀的涂层。不要板之间停止,总是从房间到另一个的一端适用。为了防止圈痕,请务必保持湿边。不要让你的光洁度一举干施加下之前。

灿Minwax®完整的地板面漆可以在工厂加工过的地板使用?

If you have factory finished flooring, it’s best to consult a flooring professional before undertaking any floor finishing project.

安全表

We Also Suggest

Here are some additional products and tips to explore.